---

5-Ton Hard Rock Plant

Overview

Engineered for efficiency and durability, this complete 5-Ton Hard Rock Plant is built to handle your material from initial crushing to final recovery. We have improved the overall design and quality by building each component in modular sections, facilitating ease of maintenance and transport.

At the heart of the system is a beastly 4″ x 6″ jaw crusher that makes quick work of material, pulverizing it down to 3/16ths of an inch. With our upgraded dual roller mill system, you can reduce your material from 30 to 150 mesh in a single pass.

---

1. Primary Crushing: Jaw & Dual Roller Mill

• Primary Jaw: 4″ x 6″ (Pulverizes down to 3/16″)

• First Roller Mill: Crushes material from 30 down to 80 mesh

• Second Roller Mill: Reduces material from 80 down to 150 mesh

• Design: Upgraded double roller allows for single-pass processing

• Net Weight: 670 lbs

---

2. Wash Plant & Trommel: Mini-Max

The Mini-Max trommel handles the heavy washing and screening, adaptable to various power and fuel setups.

Specification	Details
Dimensions (L x W x H)	119″ x 45″ x 46″ (3,022 x 1,143 x 1,168 mm)
Weight	800 lbs (363 kg) Depending on options
Scrubber Barrel	48″ Length (1,218 mm)
Screen Barrel	36″ Length (914 mm)
Barrel Diameter & Speed	15″ (381 mm) / Variable Speed
Hopper Size	22″ x 25″ (558 x 635 mm) – Other options available
Water Requirements	230 US-GPM (Minimum) / 380+ US-GPM (Preferred)
Power Options	Electric: 230/120V single phase (50/60 Hz)   Gas: Briggs or Honda   Diesel: Available upon request
Generator Req.	4,500 Watt minimum
Schedule B Code	8474.10.0010

---

3. Primary Recovery Systems

Pan-American Rougher Jigs (Square Type)

Specification	Details	Specification	Details
Size	12″ x 12″	Hutch Water Req.	15 – 40 gal/min/cell
Capacity	2 – 3 yd³/hour	Stroke Length	1/4″ to 1-1/2″
Max Feed Size	1/2″	Stroke Frequency	140 – 175 RPM
Concentration Ratio	300:1	Ragging Bed	3/16″ Steel
Shot per Cell	80 lbs	Power Required	0.5 HP
Weight	165 lbs	Shipping Dims	36″ x 12″ x 30″

Shaker Table

Size	Capacity	Motor	Weight
4′ x 8′	2,000 – 2,500 lbs/hr	1/2 HP, 110V (Single Phase)	1,500 lbs

---

4. Pumping & Fluid Management

AMT Self-Priming Recirculation Trash Pump

Designed for sewage treatment and heavy fluid transfer.

• Model: AMT 316B-95 (Series 2″ to 4″ Pumps)

• Motor: 3 HP, 3450 RPM, 230V, 60 Hz (1-Phase, 16 Amps, TEFC Enclosure)

• Ports: 2″ NPT (Suction and Discharge)

• Materials: Cast Iron with Viton Silicon/Carbide Shaft Seal

• Performance: Self-primes to 20 ft. Max Working Pressure: 150 PSI. Max Temp: 180°F.

• Dimensions: 20.3″ L x 9.3″ W x 8.8″ H

HD3000 Heavy Duty Tailing Pump

Built to handle abrasive slurry at high volumes.

• Motor: 40 HP, 1800 RPM (NEMA TEFC, Frame 326TC)

• Ports: 4″ Suction / 3″ Discharge (10″ Impeller Diameter)

• Duty Point Performance: 300 US GPM @ 120 ft Head

• Fluid Handling: Rated for Slurry (SG: 1.6, Density: 99.7 lb/ft³, Viscosity: 1.1 cP)

---

5. Power & Storage Infrastructure

Power Generation: Generac 24kW

• Output: 24,000 Watts (LP) / 21,000 Watts (NG)

• Electrical: 120/240V Single-Phase, 60 Hz, 100 Amps

• Engine: Generac OHVI 999cc (3600 RPM) with Low Oil Shutdown

• Fuel Consumption:

  • LP: 2.53 gal/hr (@50% load) / 3.9 gal/hr (@100% load)

  • NG: 206 ft³/hr (@50% load) / 306 ft³/hr (@100% load)

• Features: Air-cooled, aluminum enclosure, automatic transfer switch, composite mounting pad, Wi-Fi remote monitoring, and 67 dB rating (@7m). Backed by a 5-year commercial/consumer warranty.

On-Site Tank Storage

• Water Storage: 2,500 Gallons

• Recirculation Tanks: 2,000 Gallons (Three-stack configuration)

• Diesel Fuel: 100 Gallons

• LP Fuel: Dual 20 lb tanks

---