10-Ton Hard Rock Crushing & Wash Plant

---

10-Ton Hard Rock Crushing & Wash Plant

System Specifications & Component Breakdown

---

1. Mobile Jaw Crusher

Built for mobility and high-capacity primary crushing.

• Type: Mobile Crusher (Wheel-Mounted, 4 Wheels)

• Capacity: 15 to 20 Tons / Hour

• Power Options: 20 HP Motor OR 32 HP Eicher Diesel Engine (Self-Start)

• Jaw Size: 9/16 Inch

• Maximum Stone (Boulder) Feed Size: 9/16 Inch

• Output Grain Size: 10 to 80 mm

• Adjustment: Manual (10 to 100 mm)

• Crushing Force: 180 KN

• Flywheels: 2 units (400 kg each)

• Vibratory Screen: 1 unit (Dual Deck)

• Foundation Sizes: 6 ft / 8 ft / 14 ft

---

2. Hammer Crusher Series

High-efficiency secondary crushing. Available in multiple configurations.

Model	Power (kW)	Capacity (t/h)	Feed Size (mm)	No. of Hammers	Weight (t)
ST-200×300	5.5 – 4	3 – 4	210 x 250	9	0.23
ST-240×250	7.5 – 4	5 – 7	270 x 310	16	0.60
ST-310×520	15 – 4	7 – 10	300 x 380	20	0.80
ST-400×600	22 – 4	10 – 15	440 x 290	20	1.20
ST-600×600	30 – 4	20 – 30	590 x 330	24	1.50
ST-600×800	55 – 4	18 – 32	650 x 460	24	1.90
ST-800×800	75 – 4	25 – 35	650 x 480	28	2.00
ST-800×1000	90 – 4	35 – 55	650 x 550	28	3.60
ST-1000×1000	110 – 4	45 – 70	850 x 580	32	5.00

---

3. Trommel Wash Plant

Heavy-duty washing and material classification.

General Dimensions & Weight

• Length: Standard: 156″ (3,962mm) | Extended: 204″ (5,181mm)

• Width: 90″ (2,286mm)

• Height: 90″ (2,286mm)

• Weight: 2,400 – 2,800 lbs (1,089 – 1,271 kg) (varies by options)

Barrel & Processing Specs

• Scrubber Barrel Length: Standard: 48” (1,219mm) | Extended: 96″ (2,438mm)

• Screen Barrel Length: 60” (1,524mm)

• Barrel Diameter: 15” (381mm)

• Barrel Speed: 12 RPM

• Vibrating Feed Hopper: Fully adjustable via on-board VDF (400 – 1,000 cycles/minute)

Feed Hopper & Sluice

• Feed Hopper Dimensions (Dump Area): 96” L x 66” W x 12” H (2,438 x 1,676 x 304mm)

• Grizzly Classification Size: 3″ (76.2mm)

• Gold Sluice Dimensions: 12′ L x 18″ W (3,657 x 457mm) (Custom lengths available)

Power, Water & Compliance

• Electric Drive System: 230V Single Phase, 50/60 Hz compatible (7,500W generator minimum recommended)

• Water Requirements: 380 US-GPM minimum | 400+ US-GPM preferred

• Schedule B Code: 8474.10.0010

---

4. Optional Diamond / Gemstone Pan-American Duplex Jig

High-recovery gravity separation available in multiple cell configurations.

Model / Size	Capacity (yd³/hr)	Max Feed	Ratio	Water Req. (gal/min/cell)	Stroke Length (in)	Stroke Freq.	Ragging Bed (lbs/cell)	Power (HP)	Weight (lbs)	Shipping Dims (W x L x H)
12” x 12”	2 – 3	1/2″	300:1	15 – 40	1/4” to 1-1/2”	140 – 175	80	0.5	165	36″ x 12″ x 30″
16” x 16”	3 – 6	1/2″	300:1	5 – 10	3/4” to 1-1/2″	140 – 175	100	0.5	750	20″ x 36″ x 56″
30” x 30”	10 – 15	1/2″	300:1	25 – 50	3/4” to 1-1/2″	140 – 175	200	2.0	1,250	Standard
42” x 42”	20 – 30	1/2″	300:1	40 – 100	3/4” to 1-1/2″	120 – 140	400	3.0	2,400	Standard
42” (4-Cell)	40 – 60	1/2″	300:1	60 – 160	3/4” to 1-1/2″	120 – 140	400	5.0	4,800	Standard
42” (6-Cell)	60 – 90	1/2″	300:1	60 – 200	3/4” to 1-1/2″	120 – 140	400	6.0	7,000	Standard

(Note: Ragging bed utilizes 3/16” steel shot)

---

5. Shaker Table

Final concentration phase.

• Dimensions: 5′ x 12′

• Power: 1 HP, 110V

• Specs: 4,000 – 4,500 / 3,000 (Check with representative for specific capacity/weight configurations)